E 150 V8-4.6L VIN W (2006)
6. Install the secondary latches.
7. Install the fluid cooler tubes in the front and rear cooler line case fittings.
^
Tighten to 40 Nm (30 ft. lbs.).
8. Position the air deflector and install the bolts.
^
Tighten to 15 Nm (11 ft. lbs.).
9. Lower the vehicle.
10. CAUTION: Use only Mercon(R) SP Transmission Fluid to service TorqShift transmissions. Mixing Mercon(R) or Mercon(R)V in a TorqShift
transmission may cause transmission damage. Use of any fluid other than the recommended fluid can cause transmission damage.
Fill the transmission with the specified type and quantity of transmission fluid.
11. Check for leaks.