E 150 V8-4.6L VIN W (2006)
4. Install the manual valve detent lever spring and bolt.
^
Tighten to 10 Nm (89 inch lbs.).
5. Install the digital TR sensor and loosely install the bolts.
6. NOTE: The manual shift lever must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor slots. The tool is designed to fit snug.
7. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.
Tighten the digital TR sensor bolts.
^
Tighten to 9 Nm (80 inch lbs.).