E 150 V8-4.6L VIN W (2006)
6. Position the rear driveshaft and align the marks on the pinion flange.
7. CAUTION: The driveshaft centering socket yoke fits tightly on the rear axle pinion flange pilot. To make sure that the yoke seats squarely on the
flange, tighten the bolts evenly in a cross pattern.
Install the new bolts.
^
Tighten to 112 Nm (83 ft. lbs.).
8. Install the disc brake calipers.
9. Install the rear wheel and tire assemblies.
