E 150 V8-5.4L (2008)
Seat Cover: Service and Repair
Seat Backrest Cover - Rear, Bucket
SEAT BACKREST COVER - REAR, BUCKET
Removal and Installation
1. Remove the RH and LH armrests from the seat.
2. Release the J-clip at the lower edge of the backrest trim cover.
3. CAUTION: Use care when separating the seat backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn
from the seat backrest foam pad.
Invert the backrest trim cover, release the hook-and-loop strips and remove.
4. To install, reverse the removal procedure.
