E 150 V8-5.4L (2008)
Removal and Installation
1. Remove the steering column opening cover.
2. Remove the 2 bolts and detach the data link harness retainer.
3. Remove the 4 bolts and the instrument panel LH knee bolster.
^
To install, tighten bolts to 9 Nm (80 lb-in).
4. Disconnect the steering wheel rotation sensor electrical connector.
5. Remove the 2 steering wheel rotation sensor bolts.
^
To install, tighten to 1 Nm (9 lb-in).
6. Remove the steering wheel rotation sensor.
7. To install, reverse the removal procedure.
^
Calibrate the ABS module. Follow the scan tool directions.
