E 150 V8-5.4L (2008)
7. CAUTION: Unless otherwise instructed, at no time when the timing chains are removed and the cylinder heads are installed is the
crankshaft or camshaft to be rotated. Severe piston and valve damage will occur.
CAUTION: Rotate the crankshaft counterclockwise only. Do not rotate past position shown or severe piston and valve damage can occur.
NOTE: The No. 1 cylinder is at top dead center (TDC) when the stud on the engine block fits into the slot in the handle of the special tool.
Position the crankshaft so the No. 1 cylinder is at TDC with the special tool.
8. Install the crankshaft sprocket, making sure the flange faces forward.
