E 150 V8-5.4L (2008)
Removal and Installation
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of foreign material or failure of the power
steering components may result.
NOTE: The hydraulic booster jumper line and the pressure line can be serviced separately. It is not necessary to disconnect the jumper line from the
hydraulic booster when servicing the pressure line.
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Using a suitable suction device, remove the power steering fluid from the fluid reservoir.
6.0L diesel vehicles
3. Remove the pushpin retainers and the upper air deflector.
4. Remove the 2 power steering fluid reservoir bracket-to-cowl bolts.
^
To install, tighten to 14 Nm (10 lb-ft).
