E 150 V8-5.4L (2008)
5. Loosen, but do not remove, the digital TR sensor bolts.
6. NOTE: The manual control lever must be in the NEUTRAL position.
Using the special tool, align the digital TR sensor slots. The tool is designed to fit snug.
7. CAUTION: Tightening one bolt before tightening the other may cause the digital TR sensor to bind or become damaged.
Using the special tool, align the digital TR sensor and tighten the bolts in an alternating sequence.
^
Tighten to 9 Nm (80 lb-inch).
