E 150 V8-5.4L (2008)
Inertia Fuel Shutoff Switch: Service and Repair
INERTIA FUEL SHUTOFF (IFS) SWITCH
Removal and Installation
1. Remove the RH cowl side trim panel.
2. CAUTION: Do not over tighten the fasteners or damage to the switch will occur.
Disconnect the inertia fuel shutoff (IFS) switch electrical connector. Remove the bolts and IFS switch.
-
To install, tighten to 2 Nm (18 lb-in).
3. To install, reverse the removal procedure.
