E 150 V8-5.4L (2008)
All semi-floating axles
5. Using the special tool, remove and discard the wheel stud.
Installation
CAUTION: Do not use air tools to install wheel studs or damage to the serrations can occur.
All semi-floating axles
1. Position the wheel stud in the flange, making sure that the serrations are aligned with those made by the original wheel stud.
2. NOTE: Do not use a wheel nut that was previously removed from the vehicle.
Install washers and a wheel nut on the wheel stud and tighten the wheel nut until the wheel stud seats against the flange.
Dana 60 semi-floating axles
3. Install the parking brake shoe adjusting screw.
4. Install the parking brake shoe adjusting screw spring.
All semi-floating axles
5. Install the brake disc.
6. Install the disc brake caliper anchor plate.
