E 150 V8-5.4L (2008)
5. Clean and inspect the transmission fluid pan, gasket and magnet.
Installation
1. CAUTION: If installing a new transmission fluid filter and the seal remains in the main control bore, carefully use a small screwdriver to
remove the seal. Use care not to damage the main control bore.
NOTE: If transmission is being repaired for a contamination-related failure, use a new transmission fluid filter and seal. The transmission fluid
filter may be reused if no excessive contamination is present.
Install a new transmission fluid filter and seal as required.
2. Position the transmission fluid pan magnet into the transmission fluid pan.
