E 150 V8-5.4L (2008)
Parking Pawl: Service and Repair
Torqshift - Automatic Transaxle/Transmission
Park System
Removal
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the rear driveshaft.
Vehicles equipped with a fixed yoke
3. Remove the output shaft flange.
1
Remove and discard the output shaft flange bolt.
2
Remove the output shaft flange.
4. Using the special tool, remove and discard the output shaft retaining nut.
All vehicles
5. Using a suitable transmission jack, support the transmission.
6. Remove the bolts and raise the transmission upward off the insulator.