E 150 V8-5.4L (2008)
3. Index-mark the driveshaft yoke and the transmission tailshaft.
4. Remove the 4 driveshaft-to-pinion flange bolts.
5. NOTE: The driveshaft flange yoke fits tightly on the pinion flange pilot. Never hammer on the driveshaft or any of its components to disconnect
the yoke from the flange. Pry only in the area shown, with a suitable tool, to disconnect the yoke from the flange.
Using a suitable pry bar, disconnect the driveshaft flange yoke from the pinion flange.