ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Power Locks > < Keyless Entry Transmitter - Intermittent Operation|Page 9846
Page 1
background image

Keyless Entry Transmitter: Description and Operation

The electronic door lock control system is supplied with two three-button hand-held keyless entry remote transmitters.

NOTE:  The electronic door lock control features will not function when the key is in run or accessory.

To unlock the driver front door, press the UNLOCK button once on a keyless entry remote transmitter that has been programmed into the remote keyless
entry module.

To unlock all doors, press the UNLOCK button on a keyless entry remote transmitter twice. The second press must be within five seconds of the first. If
more than five seconds have elapsed since the first press of the UNLOCK button, pressing the UNLOCK button again will only unlock the driver front
door.

To turn on the interior lamps, press the UNLOCK button.

To lock all doors, press the LOCK button on a keyless entry remote transmitter once. If the side door was open during the lock operation, the memory
lock feature will activate to lock the side door after it is closed again. Pressing the lock button a second time within five seconds will lock the locks again
and activate the lock verify feature which will provide a "chirp" from the horn.

To activate the personal security alarm, press the red PANIC button on a transmitter. The horn will sound and the parking lamps and headlamps will
flash for a maximum of three minutes. Activating the panic alarm also illuminates the interior lamps.

To deactivate the personal security alarm, press the red PANIC button on the same keyless entry remote transmitter that was used to activate the alarm,
or turn the key on.

Power Locks > < Keyless Entry Transmitter - Intermittent Operation|Page 9846