E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
2. Fill the rubber caliper sleeve boots with Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A (Motorcraft WA-10) or en
equivalent silicone compound meeting Ford specification ESE-M1C171-A.
CAUTION: To prevent deterioration of the caliper sleeve boots, do not use petroleum-based lubricant.
Brake Caliper And Front Brake Hose
3. Install the disc brake caliper.
a. Position the disc brake caliper in the front wheel spindle.
b. Install and tighten the caliper bolts; tighten to 30-36 Nm (22-26 ft. lbs.).
4. If so equipped, attach the speed sensor wiring to the front brake hose.
5. Bleed the brakes.
