E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
Radiator: Service and Repair
Removal & Installation
REMOVAL
1. Drain the cooling system.
2. Remove the air cleaner assembly.
3. Remove the plastic rivet retainers and the air deflector from the vehicle.
4. Remove the radiator hoses from the radiator.
5. Disconnect the overflow hose from the radiator.
6. Remove the (A) fan and fan clutch from the (B)water pump pulley.
CAUTION: The large clutch assembly nut has a right-hand thread and must be rotated counterclockwise to remove it.
7. Remove the (A) bolts and lift the (B) fan shroud, and fan and fan clutch from the vehicle.
8. Remove the underbody splash shield, if so equipped.
