ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Camshaft, Engine|Testing and Inspection > < Camshaft Thrust Plate|Specifications
Page 1
background image

Camshaft: Specifications

DIMENSIONS

Lobe Lift    

Intake .........................................................................................................................................................................................  6.22 mm (0.245 Inch)
Exhaust ......................................................................................................................................................................................  6.57 mm (0.259 Inch)

Lobe Wear Limit    

Intake .......................................................................................................................................................................................  0.127 mm (0.005 Inch)
Exhaust ....................................................................................................................................................................................  0.127 mm (0.005 Inch)

End Play Wear Limit ................................................................................................................................................  0.025-0.150 mm (0.001-0.006 Inch)
Journal-to-Bearing Clearance .................................................................................................................................  0.025-0.015 mm (0.001-0.0006 Inch)
Runout .............................................................................................................................................................................................  0.05 mm (0.002 Inch)
Journal Diameter ...............................................................................................................................................  52.108-52.082 mm (2.0515-2.0505 Inch)
Out-of-Round Limit .......................................................................................................................................................................  0.025 mm (0.001 Inch)

Camshaft, Engine|Testing and Inspection > < Camshaft Thrust Plate|Specifications