E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
Ignition Cable: Service and Repair
REMOVAL
CAUTION:
-
Spark plug wires must be connected to the proper ignition coil terminal and spark plug.
-
Mark the spark plug wire locations prior to removal.
1. Use Spark Plug Wire Remover to pull the spark plug wire off the spark plug.
2. Squeeze the (A) locking tabs and remove the (B) spark plug wires from the (C) ignition coil.
3. Disconnect spark plug wire routing clips.
4. Remove the LH spark plug wires.