ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Door Actuator|Page 8818 > < Air Door Actuator|Page 8816
Page 4
background image

REMOVAL

1. Disconnect the battery ground cable.

WARNING:  TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE INJURY, THE AIR BAG SYSTEM BACKUP POWER
SUPPLY MUST BE DEPLETED BEFORE SERVICING ANY CLIMATE CONTROL COMPONENTS. TO DEPLETE THE BACKUP
POWER SUPPLY, DISCONNECT THE BATTERY-TO-STARTER CABLE AND WAIT ONE MINUTE.

2. Remove the access panel.

^

Use a screwdriver to pry the access panel out.

3. Remove the vacuum line.

4. Remove the two screws.

5. Remove the vacuum control motor.

a. Lift up on the vacuum control motor arm to disengage it from the door crank.
b. Remove the vacuum control motor.

Air Door Actuator|Page 8818 > < Air Door Actuator|Page 8816