ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

A/C Evaporator Register Ducts|Page 8826 > < A/C Evaporator Register Ducts
Page 1
background image

Air Duct: Service and Repair
A/C Vent and Floor Duct

REMOVAL

1. Disconnect the battery ground cable.

WARNING:  TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE INJURY, THE AIR BAG SYSTEM BACKUP POWER
SUPPLY MUST BE DEPLETED BEFORE SERVICING ANY CLIMATE CONTROL COMPONENTS. TO DEPLETE THE BACKUP
POWER SUPPLY, DISCONNECT THE BATTERY-TO-STARTER CABLE AND WAIT ONE MINUTE.

2. Remove the instrument panel.
3. Remove the heater outlet floor duct.
4. Remove the steel reinforcement assembly.

5. Remove the screw.

6. Remove the A/C vent and floor duct.

a. Remove the five screws.
b. Remove the A/C vent and floor duct.

INSTALLATION

1. Follow the removal procedure in reverse order.

NOTE:  When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control
module relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.

A/C Evaporator Register Ducts|Page 8826 > < A/C Evaporator Register Ducts