E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
8. Remove the A/C manifold and tube.
a. Loosen the screw.
b. Remove the A/C manifold and tube.
INSTALLATION
1. Add new, clean Motorcraft refrigerant oil YN-12b or equivalent meeting Ford specification WSH-M1C231-B.
Note: Whenever replacing an A/C system component or refrigerant line, new, clean refrigerant oil must be added.
2. Install the A/C manifold and tube.
a. Install two new green O-rings.
Note: The green O-ring(s) cannot be seen. They are located in the connection(s).
b. Install the A/C manifold and tube.
c. Tighten the screw.
3. Connect the compressor discharge line.
a. Install a new green O-ring.
^
Lubricate with clean Motorcraft YN-12b refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B.
Note: The green O-ring(s) cannot be seen. They are located in the connection(s).
b. Connect the compressor-to-condenser core fitting.
Note: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
