E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
7. In stall the compressor discharge line isolator.
a. Install the compressor discharge line isolator.
b. Install the screw.
8. Connect the condenser to evaporator tube.
a. Install a new green O-ring.
^
Lubricate with Motorcraft refrigerant oil YN-12b or equivalent meeting Ford specification WSH-M1C231-B.
NOTE: The green O-ring(s) cannot be seen. They are located in the connection(s).
b. Connect the condenser to evaporator tube.
NOTE: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
c. Install the screw.