E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
Hazard Warning Flasher: Initial Inspection and Diagnostic Overview
Special Service Tool(s)
Special Tool(s)
1. Verify the vehicle owner's original concern by operating the turn signal/hazard flasher lamps to duplicate the original condition.
2. Inspect to determine if one of the following electrical concerns apply:
VISUAL INSPECTION CHART
ELECTRICAL
^
Circuitry open/shorted
^
Blown IP fuse panel Fuse 7(10A) and Fuse 11(15A)
^
Damaged multi-function switch
^
Bulb burned out
^
Damaged indicator flasher
3. If the concern(s) remains after the inspection, determine the symptom(s) and proceed to the symptom chart. See: Symptom Related Diagnostic
Procedures
