E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
3. Replace the fluid filter and seal as required.
4. Position the pan magnet into the transmission fluid pan.
5. Install the transmission fluid pan and gasket.
(1) Position the transmission pan gasket.
(2) Position the transmission fluid pan.
NOTE: The transmission pan gasket is reusable. Clean and inspect for damage; if not damaged, reuse the gasket.
6. Install the transmission fluid pan bolts.
7. Remove the supports and lower the vehicle.
8. Fill the transmission to the proper fluid level.
-
Use MERCON(R) V Automatic Transmission Fluid XT-5-QM or equivalent.
NOTE: When filling a dry transmission and converter start with a minimum of 4.7 liters (5 quarts).