E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
2. Remove the Idle Air Control (IAC) valve.
1
Disconnect the electrical connector.
2
Remove the bolts.
3
Remove the IAC valve.
4
Remove and discard the IAC valve gasket.
INSTALLATION
NOTE: A new IAC valve gasket must be installed.
1. Install the IAC valve.
1
Position the IAC valve gasket.
2
Position the IAC valve.
3
Install the bolts.
4
Connect the electrical connector.
2. Connect the battery ground cable.
