E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
Leak Detection Sensor: Service and Repair
REMOVAL
1. Remove the fuel tank.
CAUTION: The fuel tank pressure sensor must be disengaged from the fuel tank before it can be removed. Rotate the fuel tank pressure sensor
counterclockwise to disengage it from the fuel tank. Failure to do so can cause damage to the fuel tank pressure sensor or the fuel tank.
2. Remove the fuel tank pressure sensor.
1
Disconnect the electrical connector.
2
Press down and rotate the fuel tank pressure sensor counterclockwise and remove it from the fuel tank.
INSTALLATION
To install, follow the removal procedure in reverse order.
