E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
Spark Plug: Service and Repair
REMOVAL
1. Use Spark Plug Wire Remover to pull the ignition wires off the spark plugs.
NOTE:
-
Use compressed air to remove any debris from the spark plug well before removing the spark plugs.
-
If an original spark plug is reused, make sure it is placed in the same cylinder it was taken from. Replacement spark plugs can be used in any
cylinder.
2. Remove the RH spark plugs.
3. Remove the LH spark plugs.
