E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
Crankshaft Position Sensor: Service and Repair
REMOVAL
1. Raise and support the vehicle.
2. Remove Crankshaft Position (CKP) sensor.
1
Disconnect the CKP sensor electrical connector.
2
Remove the (A) CKP sensor shield nuts and the (B) CKP sensor shield.
3
Remove the (C) CKP sensor bolts and the (D) CKP sensor.
INSTALLATION
1. Install crankshaft position sensor.
1
Position the CKP sensor.
2
Install the bolts.
3
Position the shield.
4
Install the shield nuts.
5
Connect the electrical connector.
