E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
Child Seat Tether Attachment: Description and Operation
Child Safety Seat-Tether Attachment
Some manufacturers make safety seats with a tether strap that goes over the back of the vehicle seat and attaches to an anchoring point behind the seat.
Ford recommends the placement of tethered safety seats in a rear seating position, with the tether strap attached to the tether anchoring point. The right
front seating position can be used if it is the only seating position available. The tether anchor attachment point for the right front seating position is
located on the rear edge of the seat. Refer to the vehicle owner guide for installation instructions.
Tether Anchor Hardware
Tether anchor points are provided in the vehicle for child safety seats requiring a tether anchor. Tether anchor hardware kits are available at no cost
through Ford or Lincoln-Mercury dealership parts departments. These kits have instructions and hardware specific to the applicable vehicle.
