E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
5. On the driver side, remove the front safety belt anchor.
1
Use the Safety Belt Bolt Bit to remove the bolt.
2
Remove the front safety belt anchor.
6. On the passenger side, remove the front door scuff plate, the center body pillar upper trim panel and the center body pillar lower trim panel.
7. Remove the front safety belt retractor and the front safety belt anchor.
1
Use the Safety Belt Bolt Bit to remove the retractor bolt.
2
Remove the front safety belt retractor.
3
Use the Safety Belt Bolt Bit to remove the anchor bolt.
4
Remove the front safety belt anchor.
INSTALLATION
Follow the removal procedure in reverse order.
-
Check the restraint system for proper operation.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
NOTE: Tighten bolts to specification.
