E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
7. On a rear safety belt retractor and tongue with a detachable safety belt anchor, disengage the detachable safety belt anchor.
1
Insert a key or small screwdriver into the slot in the detachable anchor and lift upward.
2
Disengage the detachable anchor tongue end from the detachable anchor.
8. On a rear safety belt retractor and tongue without a detachable safety belt anchor, remove the safety belt anchor.
1
Use the Safety Belt Bolt Bit to remove the bolt.
2
Remove the safety belt anchor.
INSTALLATION
Follow the removal procedure in reverse order.
-
Check the restraint system for proper operation.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
NOTE: Tighten bolts to specification.