E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
Starter Solenoid: Testing and Inspection
Solenoid M-Terminal
73 Digital Multimeter
Alternator, Regulator, Battery And Starter Tester(ARBST)
SPECIAL TOOLS REQUIRED
1. Make sure the starter solenoid is isolated from the starter motor. Using the 73 Digital Multimeter, check for continuity between the S- and
M-terminals. Also check for continuity between the S-terminal and starter motor body. If either check shows no continuity, replace the starter
solenoid.
2. Check for continuity between the M-terminal and the B-terminal. If there is continuity, replace the starter solenoid.