E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
Power Steering Line/Hose: Service and Repair
REMOVAL
1. Remove the drive belt.
2. Raise and support the vehicle.
3. Disconnect the power steering reservoir pump hose from the power steering pump.
^
Drain the power steering oil reservoir.
4. Remove the high-pressure fitting from the power steering pump.
NOTE: Replacement of the power steering high-pressure fitting is only necessary when replacing the power steering high-pressure hose. The
high-pressure fitting is a one-time usage, quick connect only. Once the high-pressure hose is installed, the fitting will not disconnect.
5. Remove the two top power steering pump bolts.
6. Remove the lower pump bolt and remove the power steering pump.
