E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
2. Remove the steering column bearing and steering column bearing sleeve from the steering column lower bearing retainer by hand.
INSTALLATION
1. Inspect the steering column bearing sleeve. Replace if damaged.
2. Position the steering column bearing sleeve in the steering column lower bearing retainer.
3. Press in the new steering column bearing with thumb pressure until seated. The inner race should face down when installed in the vehicle fully
visible when the steering column lower bearing retainer is installed on the steering column.
4. Install the steering column lower bearing retainer on the steering column tube.
