E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
2. Tighten the tie rod adjusting sleeve clamp.
3. Install the ball stud in the front wheel spindle, then tighten the castle nut.
4. Install a new cotter pin.
5. Check toe-in and clear vision.
2. Tighten the tie rod adjusting sleeve clamp.
3. Install the ball stud in the front wheel spindle, then tighten the castle nut.
4. Install a new cotter pin.
5. Check toe-in and clear vision.