E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
Stabilizer Bushing: Service and Repair
REMOVAL
1. Remove the front stabilizer bar.
2. Remove the stabilizer bar bushing.
(1) Position the Forcing Screw, Receiver Cup and Bushing Remover through the stabilizer bar bushing.
(2) Press the stabilizer bar bushing out of the front axle.
INSTALLATION
1. Install the stabilizer bar bushing.
(1) Position the (A) Forcing Screw, (B) Receiver Cup, (C) Installation Cup and (D) stabilizer bar bushing on the (E) front axle.
(2) Press the (D) stabilizer bar bushing into the (E) front axle until seated.
2. Install the front stabilizer bar.
