E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
Suspension Spring ( Coil / Leaf ): Service and Repair
Coil Spring
REMOVAL
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the front stabilizer bar.
4. Use a suitable jack to support the affected front axle.
CAUTION: The axle must be supported throughout the procedure to prevent strain on the front brake hose. If the disc brake caliper must be removed
for additional clearance, refer to Brakes and Traction Control.
5. Disconnect the shock absorber from the radius arm.
(1) Remove the lower shock absorber nut.
(2) Disconnect the lower end of the shock absorber.
6. Remove the bolt and the upper spring retainer.
