E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
6. If piston travel is not within specification, select the proper servo assembly (A) one groove, (B) two groove or (C) three groove, to bring the servo
piston travel within specification.
7. Remove the dial indicator and servo selection tool.
8. Install the proper reverse band servo spring, reverse band servo piston and rod and reverse band servo cover.
9. Use the (A) Servo Piston Remover/Replacer to install the (B) reverse servo retaining ring.
10. Install the main control valve body.
