E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
5. Use (A) Clutch Spring Compressor T65L-775 1 5-A to compress the piston return spring and install the (B) retaining ring.
6. Install the (A) clutch pack and the (B) clutch pack retaining ring.
-
Alternate external spline (steel) plates and internal spline (friction) plates, starting with a steel plate and ending with the steel pressure plate.
NOTE: Before assembly, soak new clutch discs should be soaked in transmission fluid for 15 minutes.
7. Use a (A) feeler gauge to check the clearance between the (B) clutch pack retaining ring and the (C) pressure plate.
-
If the clearance is not within specifications, install the correct size retaining ring and recheck clearance.
