E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
7. Install a new (A) reverse clutch piston inner seal and (B) reverse clutch piston outer seal.
NOTE: The piston check ball must be present and moving freely.
8. Install the reverse clutch piston.
(1) Position Reverse Clutch Inner Seal Protector T80L-77403-B on the clutch hub.
(2) Place Reverse Clutch Outer Seal Protector T80L-77403-A over reverse clutch piston.
(3) Position the reverse clutch piston and use even pressure to push it to the bottom of the reverse clutch drum.
NOTE: Coat the reverse clutch piston inner seal, reverse clutch piston outer seal reverse clutch drum sealing area and seal protector with
petroleum jelly.
9. Install the (A) pressure ring and the (B) reverse clutch piston spring.
NOTE: The dished side of the reverse clutch piston spring must face the reverse clutch piston.
