E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
ACTION:
Until the new design reverse clutch assembly service parts are fully stocked, the current service parts must be used when replacement of any of the
reverse clutch assembly is required (refer to Part Usage Chart and Figure 1). Refer to the following text for details.
CAUTION:
IF ANY ONE OF THE NEW DESIGN COMPONENTS (REFER TO PART USAGE CHART) REQUIRE REPLACEMENT, ALL FIVE (5)
COMPONENTS MUST BE REPLACED. THE PREVIOUS DESIGN AND NEW DESIGN ARE NOT INTERCHANGEABLE ON AN
INDIVIDUAL BASIS.
When service is required on an E4OD transmission having a build date March 25, 1997 (7C25), or later and is equipped with the new design reverse
clutch components, the current level service parts can be used until the new design service parts are available.
NOTE:
ONLY THE REVERSE CLUTCH COMPONENTS LISTED IN THE PARTS USAGE CHART ARE AFFECTED.
