E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
2. Install the (A) intermediate clutch piston inner seal and the (B) intermediate clutch piston outer seal.
3. Locate the piston bleed hole.
CAUTION: The piston bleed hole must be located at 12 o'clock position (towards the top of the transmission).
NOTE: The piston bleed hole is the only round hole in the pump body.
4. Install the (A) intermediate clutch piston into (B) Clutch Lip Seal Protector T80L-77005-A.
NOTE: Coat the intermediate clutch piston outer seal, intermediate clutch piston inner seal and pump body sealing area with petroleum jelly.
5. Install the intermediate clutch piston.
(1) Position the intermediate clutch piston and Clutch Lip Seal Protector T80L-77005-A onto the pump body.
(2) Push the intermediate clutch piston to the bottom of the pump body bore by exerting even pressure.
