E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
4. Install the manual valve detent spring.
(1) Position the manual valve detent spring.
(2) Install the manual valve detent spring bolt.
5. Install the DTR sensor.
(1) Position the DTR sensor.
(2) Loosely install the bolts.
6. Use the Digital Transmission Range (DTR) Sensor Alignment Tool to align the DTR sensor slots.
NOTE: The manual control lever must be in the NEUTRAL position.
7. Tighten the DTR sensor bolts and remove the Digital Transmission Range (DTR) Sensor Alignment Tool.
