E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
6. Insert the differential pinion shaft.
-
Align the hole in the differential pinion shaft with the hole in the differential case.
7. Install a new differential pinion shaft lock bolt and tighten finger-tight.
NOTE:If a new pinion shaft lock bolt is unavailable, coat the threads with Thread lock and Sealer EOAZ-19554-AA or equivalent meeting Ford
specifications WSK-M2G315-A5 and ESE-M4G204-A2 prior to installation.
8. Use Differential Side Bearing Replacer to install the new differential bearings on the differential case.
9. Press the new (A) anti-lock speed sensor ring and the (B) ring gear on the differential case.
