E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
6. Mark the (A) driveshaft rear axle companion flange in relation to the (B) drive pinion stem to insure proper alignment during installation.
7. Use 2-Jaw Puller for Differential Case Bearings to remove the rear axle companion flange.
INSTALLATION
1. Lubricate the rear axle companion flange splines.
-
Use Motorcraft Synthetic Rear Axle Lubricant F1TZ-19580-B or equivalent meeting Ford specification WSP-M2C192-A.
2. Align the (A) rear axle companion flange with the (B) drive pinion shaft.
NOTE: Disregard the scribe marks if a new rear axle companion flange is being installed.
3. With the drive pinion in place in the axle housing, install the rear axle companion flange using the Companion Flange Replacer.
