E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
When using Cable "E" (Figure 3) to diagnose the DTR sensor, the slide switch must be in the "Digital" position and the "Black" 12-pin connector
installed on the sensor. Having the slide switch in the incorrect position or using the incorrect 12-pin connector will result in misdiagnosis and possible
replacement of a good component.
For diagnosis of the DTR sensor, always refer to the appropriate model 1997 Service Manual, Section 07.01 or appropriate model 1997 Workshop
Manual, Section 3O7-01 for proper procedure and required equipment.
OTHER APPLICABLE ARTICLES: 95-19-7
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 501000, 502000, 503000, 503300, 504000, 601300
