E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
Power Window Switch: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Pry the window regulator switch plate up.
3. Remove the two screws.
4. Pry up and remove the window regulator control switch.
INSTALLATION
1. Follow the removal procedure in reverse order.
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control
Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 16km (10 miles) or more to relearn the strategy.
