E 150 1/2 Ton Van V6-4.2L VIN 2 (1997)
Wiper Motor: Service and Repair
REMOVAL
1. Raise and support the hood.
2. Remove the windshield wiper pivot arms.
3. Remove the cowl top vent panels.
4. Disconnect the windshield wiper mounting arm and pivot shaft.
1. Remove the access cover from the dash panel.
2. Remove the mounting arm and pivot shaft retaining clip.
3. Disconnect the windshield wiper mounting arm and pivot shaft from the windshield wiper motor.
5. Remove the windshield wiper motor.
1. Disconnect the electrical connector.
2. Remove the three bolts.
3. Remove the windshield wiper motor.
INSTALLATION