E 150 1/2 Ton Van V8-5.4L SOHC VIN L (1997)
6. Remove the shoulder safety belt height adjuster.
1
Use the Safety Belt Bolt Bit to remove the bolts.
2
Remove the shoulder safety belt height adjuster.
INSTALLATION
Follow the removal procedure in reverse order.
-
Check the restraint system for proper operation.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
NOTE: Tighten bolts to specification.
Seat Belt Tensioner
REMOVAL
1. Disconnect the battery ground cable. On vehicles equipped with dual batteries:
-
Disconnect primary battery ground cable.
-
Disconnect auxiliary battery frame ground bolt. Pull cable away from the frame and make sure cable does not contact frame.
NOTE: Failure to accurately follow the battery disconnect procedures will result in vehicle or component damage.
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control
Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
2. On the driver side, remove the front seat back latch lower cover.
3. On the passenger side, remove the front seat back pivot side outer cover.
