ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Band, A/T|Adjustments > < Vacuum Restrictor|Description and Operation
Page 1
background image

Band: Technical Service Bulletins
A/T - AOD New Overdrive Band Anchor Pin

Article No.          

TRANSMISSION - AUTOMATIC OVERDRIVE

87-22-13

(AOD) - NEW OVERDRIVE BAND ANCHOR PIN -
VEHICLES BUILT BEFORE 09/30/86

FORD:

1980-87 MUSTANG, THUNDERBIRD, FORD

LINCOLN-MERCURY: 1980-83 MARK VI 1980-87 COUGAR, MERCURY, CONTINENTAL, LINCOLN TOWN CAR

LIGHT TRUCK:

1980-87 E SERIES, F SERIES, BRONCO

ISSUE:

A new overdrive band anchor pin, with a stepped diameter, is available for service. The old pin may have caused overdrive band wear or
anchor pin leakage on vehicles built before 09/30/86.

NOTE:

AOD transmissions built after 09/30/86 have the new design overdrive band anchor pin. This pin is NOT serviceable on transmissions built
after 09/30/86. If replacement is required, a new transmission case must be installed.

Figure 10

ACTION:

If service is required, use the appropriate Car or Light Truck Shop Manual, Section 17-20, for installation of the new overdrive band anchor
pin, Figure 10.

PART NUMBER

PART NAME

CLASS

E2AZ-7F295-A

Anchor Pin

C

E0AZ-19554-BA

Ford Stud and

B

Bearing Mount

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"

Band, A/T|Adjustments > < Vacuum Restrictor|Description and Operation